Hardware requirements, Profile assignment screen, Getting here – Watlow ANASOFT User Manual
Page 80: Function keys
70 ANASOFT User’s Guide
Appendix C: ANASOFT-RS
Hardware Requirements
In order to operate ANASOFT-RS, all Watlow-Anafaze controllers in
the system should include the r/s option. Currently, only 8LS, 12LS, and
CLS controllers have this option. During start up, ANASOFT-RS
checks each controller in the system to verify that the r/s option is
installed. If a controller doesn’t have the r/s option, an error message
appears, and the program will not operate with the r/s feature.
Profile Assignment Screen
Use this screen to assign loops to profiles.
Getting Here
Press F8 from the Overview screen.
Function Keys
Key
Function
F1
Enter the Edit screen.
F2
Delete a profile.
HOME / END
Flip the pages in the profile directory.
PgUp / PgDn
View more loops in the system.
ESC
Return to Overview screen.
A directory of profile names
saved on the disk. Can con-
tain up to 128 names shown
on four display pages.
Each loop is either Assigned or Not
Assigned as a r/s loop. An un-
assigned loop operates as a standard
control loop.