Watlow ANASOFT - Manual (Page 31)

General Screen Displays
ANASOFT User’s Guide 21
General Screen Displays
Certain characteristics are maintained on all ANASOFT screens as
follows:
Changing Data
• Use the cursor to enter data in the editing screens.
• Move the cursor to the variable you want to change. An editing
prompt appears at the bottom of the screen with a blue background
new value box. The allowable range of the variable is listed below
the new value box.
Title line. Includes screen’s name, current group and job, time
and date. When in Edit mode, the words “Edit Mode” appear.
Process status box. Four possible
messages:
1. Process OK (green).
2. Process warning (yellow).
There’s a warning on at least one
loop.
3. Process alarm (blinking red). An
alarm condition on at least one loop
hasn’t been acknowledged.
4. Process alarm (red). An alarm
condition on at least one loop. All System status box. Reports problems
of communications, printer access or
data logging disk access. Two possi-
ble messages:
1. System OK.
2. In case of a problem, the appropri-
ate message (red).