Watlow ANASOFT - Manual (Page 62)

52 ANASOFT User’s Guide
View Alarms
Alarm Screen Auto Switch
If you set the Auto Switch On in the System Parameters menu, the
Alarm screen appears automatically for each new alarm. You will be
asked to acknowledge each alarm. After doing that you can press Esc to
return to the last screen displayed before the alarm condition occurred.
Acknowledging the alarms from View Alarms screen also
acknowledges the alarms at the controller. Acknowledging the alarms at
the controllers will acknowledge the alarms on the View Alarms screen.
Audible Alarm
If you set the Audible Alarm On in the System Parameters menu, the
computer emits an audible warning for each new alarm. Press Enter to
silence this alarm.