Watlow ANASOFT - Manual (Page 45)

System Setup
ANASOFT User’s Guide 35
System Setup
The System Setup screen enables you to
1. Monitor system errors and reset these errors.
2. View the version and options of your ANASOFT.
3. Protect your screens using passwords.
4. Edit various system parameters, such as video control and alarm dis-
play screen.
5. Terminate the program.
6. Choose additional options for Start Up sequence.
7. Control data logging feature.
8. View the controller communication status (enabled or disabled).
9. Set the polarity of the digital outputs used for alarms.
10. In MLS controllers: select the digital output that will be activated in
case communication fails between the MLS-AIM and the MLS-PM.
The screen is divided into two sections: the left part of the screen is a list
of the available windows, depending on your ANASOFT version. An
arrow is pointing to the window currently displayed. The right part of
the screen displays one of the 8, 9, or 10 available windows. Each one
contains parameters for editing or viewing. You can view only one
window at a time.
Each window, except the System Errors window, can be either Locked
or Unlocked. If the window is Unlocked, you can change the
parameters. If the window is Locked, you can only view the parameters.
You can unlock a window by entering the password.
Getting Here
Press F3 from the Overview screen.