Watlow ANASOFT - Manual (Page 40)

30 ANASOFT User’s Guide
Loop Setup
NOTE
The Loop Setup screen in ANASOFT 3 looks slightly
different due to differences in parameters location on
the screen. However, the parameters are mostly the
same, unless indicated otherwise.
Function Keys
Parameters
To review all the parameters available in this screen, we have divided it
into three sections (shown in previous page): loop graph display, I/O
parameters, and alarm parameters and controller information.
Loop graph display
Key Function
F1 Copy all loop parameters into the loop currently displayed.
F7 Display the Graphic Trend Plot of the loop. Press Esc to return to the loop
Setup screen.
PgUp/
PgDn Change the display to other loops within the group.
TAB Change the display to other groups. Available only when there is more than
one group.
ESC Return to Overview screen.
Loop title
Output levels. Edit only
when the loop is in manual
control.
Bar graph deviation
Output control action. Set to Manual, Auto, or
Process variable
Setpoint. Set to any value between the HiPV and
LoPV of the input type. Changing SP changes
deviation alarms and warnings.
An expression of the input type.
T/C or RTD--F or C.
Linear input--any three characters.