Watlow ANASOFT - Manual (Page 52)

42 ANASOFT User’s Guide
System Setup
WARNING
Do not terminate the program with SYSTEM 32
control outputs On, unless safe operation is abso-
lutely certain without the computer.
• If you terminate the program only for a short time, to change a disk
or to fix a computer problem, and safety devices are in the process,
you can leave the controllers On.
System Start Up
This window allows you to set the two start up conditions:
• Normal start-up
• Power failure recovery:
under time limit
over time limit
For each of these conditions, you can select one of three start up actions:
1. Operator Select. The program displays the job directory and prompts
you for the job to run.
2. Download Profile. The program automatically downloads the speci-
fied profile.
3. Upload Profile. The program automatically uploads the specified
profile.