Watlow ANASOFT User Manual
Page 36
26 ANASOFT User’s Guide
Loop Overview
•
press ESC to view the next Group Overview screen. If you wish to
view another group, move the cursor to that group and press ESC.
•
If not all the loops are visible (in a large system), use the PgUp/
PgDn keys to view the other loops.
•
The Overview screen is automatically updated as data is collected
from the controllers. Measured data is displayed in engineering
units.
•
Normal readings are green, warnings are yellow, and alarms are
red.
•
If you edit the 8LS, 12LS, MLS or CLS controllers at their front
panels, the program displays the word “locked” in the single loop
Face plate and puts the letter “L” beside the process variable in the
Loop Table for the loops on the edited controller. Once the front
panel editing is complete, the display returns to normal.
Key
Function
F6
Switch displays. Change the Overview screen display to one
of its 4 options.
F7
Trend logging. display the graphic trend plot.
F8 (only in RS version)
Display the r/s program for editing and assigning r/s profiles
to loops.