IEI Integration IMB-Q354 v1.10 - Manual (Page 58)

IMB-Q354 microATX Motherboard
Page 58
o When working with the IMB-Q354, make sure that it is disconnected from
all power supplies and that no electricity is being fed into the system.
Before and during the installation of the IMB-Q354 DO NOT:
Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
Use the product before verifying all the cables and power connectors are
properly connected.
Allow screws to come in contact with the PCB circuit, connector pins, or its
components.
4.2.2 Installation Checklist
The following checklist is provided to ensure the IMB-Q354 is properly installed.
All the items in the packing list are present
The CPU is installed
The CPU cooling kit is properly installed
A compatible memory module is properly inserted into the slot
The jumpers have been properly configured
The IMB-Q354 is inserted into a chassis with adequate ventilation
The correct power supply is being used
The following devices are properly connected
o SATA drives
o Power supply
o USB cable
o Serial port cable
The following external peripheral devices are properly connected to the
chassis:
o Keyboard/Mouse
o VGA screen
o USB devices
o LAN