beautypg.com

Figure 7-8: enterprise, Figure 7-9: enable network interface – IEI Integration IMB-Q354 v1.10 User Manual

Page 176

background image

IMB-Q354 microATX Motherboard

Page 176

Figure 7-8: Enterprise

Step 9:

Select TCP/IP (in Intel AMT Configuration) and press Enter. A message prompts

for disabling network interface. Enter N to enable network interface.

Figure 7-9: Enable Network Interface

Step 10:

Enable or disable DHCP. DHCP is enabled by default. If DHCP is disabled, enter

the following TCP/IP settings:

See also other documents in the category IEI Integration Hardware: