IEI Integration IMB-Q354 v1.10 - Manual (Page 127)

IMB-Q354 microATX Motherboard
Page 127
Initiate Graphic Adapter [PEG/PCI]
Use the Initiate Graphic Adapter option to select the graphics controller used as the
primary boot device. Select either an integrated graphics controller (IGD) or a combination
of PCI graphics controller, a PCI express (PEG) controller or an IGD. Configuration
options are listed below:
IGD
PCI/IGD
PCI/PEG
PEG/IGD
PEG/PCI D EFAULT
Internal Graphics Mode Select [Enable, 8MB]
Use the Internal Graphic Mode Select option to specify the amount of system memory
that can be used by the Internal graphics device.
Enable, 1MB 1MB of memory used by internal graphics device
Enable, 8MB D EFAULT 8MB of memory used by internal graphics device
5.7.2 South Bridge Configuration
The South Bridge Configuration menu (BIOS Menu 27) the Southbridge chipset to be
configured.