IEI Integration IMB-Q354 v1.10 - Manual (Page 107)

IMB-Q354 microATX Motherboard
Page 107
Resume on PME# [Disabled]
Use the Resume on PME# BIOS option to enable activity on the PCI PME (power
management event) controller to rouse the system from a suspend or standby state.
Disabled D EFAULT Wake event not generated by PCI PME controller
activity
Enabled Wake event generated by PCI PME controller activity
Resume on Ring [Disabled]
Use the Resume on Ring BIOS option to enable activity on the RI (ring in) modem line to
rouse the system from a suspend or standby state. That is, the system will be roused by
an incoming call on a modem.
Disabled D EFAULT Wake event not generated by an incoming call
Enabled Wake event generated by an incoming call
5.3.7 AHCI Configuration
NOTE:
Advanced Host Controller Interface (AHCI) is a new programming
interface for SATA host controllers. AHCI systems do not have
master/slave designation for SATA devices, each device is treated as a
master, and hardware-assisted native command queuing.
Use the AHCI Settings menu (BIOS Menu 12) to report on the auto-detection of devices
connected to the onboard SATA drive connectors.