IEI Integration KINO-AH612 - Manual (Page 50)

KINO-AH612
Page 39
4.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the installation of the
KINO-AH612 may result in permanent damage to the KINO-AH612
and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the KINO-AH612. Dry climates are especially susceptible to ESD. It is therefore
critical that whenever the KINO-AH612 or any other electrical component is handled, the
following anti-static precautions are strictly adhered to.
ƒ Wear an anti-static wristband: Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
ƒ Self-grounding: Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
ƒ Use an anti-static pad: When configuring the KINO-AH612, place it on an
antic-static pad. This reduces the possibility of ESD damaging the
KINO-AH612.
ƒ Only handle the edges of the PCB: When handling the PCB, hold the PCB
by the edges.