IEI Integration KINO-945GSE2 - Manual (Page 75)

KINO-945GSE2 Motherboard
Page 63
Step 2: Insert the cable connectors. Insert one connector into each serial port box
headers. See Figure 4-11. A key on the front of the cable connectors ensures
the connector can only be installed in one direction.
Figure 4-11: Dual RS-232 Cable Installation
Step 3: Secure the bracket. The dual RS-232 connector has two D-sub 9 male
connectors secured on a bracket. To secure the bracket to the chassis please
refer to the reference material that came with the chassis. Step 0:
4.8 External Peripheral Interface Connection
The installation instructions for all the external devices are shown below.
4.8.1 LAN Connection (Single Connector)
There is one external RJ-45 LAN connector. The RJ-45 connector enables connection to
an external network. To connect a LAN cable with an RJ-45 connector, please follow the
instructions below.