IEI Integration KINO-945GSE2 - Manual (Page 107)

KINO-945GSE2 Motherboard
Page 95
Resume on Ring [Disabled]
Use the Resume on Ring BIOS option to enable activity on the RI (ring in) modem line to
rouse the system from a suspend or standby state. That is, the system will be roused by
an incoming call on a modem.
Disabled D EFAULT Wake event not generated by an incoming call
Enabled Wake event generated by an incoming call
Resume on PCI-Express WAKE# [Disabled]
The Resume on PCI-Express WAKE# BIOS option specifies if the system is roused from
a suspended or standby state when there is activity on the PCI-Express bus.
Disabled D EFAULT Wake event not generated by PCI-Express activity
Enabled Wake event generated by PCI-Express activity
Resume On RTC Alarm [Disabled]
Use the Resume On RTC Alarm option to specify the time the system should be roused
from a suspended state.
Disabled D EFAULT The real time clock (RTC) cannot generate a wake
event
Enabled If selected, the following appears with values that
can be selected:
RTC Alarm Date (Days)
System Time
After setting the alarm, the computer turns itself on
from a suspend state when the alarm goes off.
Resume On PS2 Keyboard/Mouse [Disabled]
Use the Resume on Keyboard/Mouse BIOS option to enable activity on either the
keyboard or mouse to rouse the system from a suspend or standby state. That is, the
system is roused when the mouse is moved or a button on the keyboard is pressed.