2 keyboard/mouse connector, Figure 4-11: audio kit cable connection – IEI Integration KINO-GM45A User Manual

Page 70

KINO-GM45A Mini-ITX SBC

Page 58

Step 2:

Align pin 1. Align pin 1 on the on-board connector with pin 1 on the audio kit

connector. Pin 1 on the audio kit connector is indicated with a white dot. See

Figure 4-11: Audio Kit Cable Connection

Step 3:

Connect the audio devices. Connect speakers to the line-out audio jack.

Connect the output of an audio device to the line-in audio jack. Connect a

microphone to the mic-in audio jack.

Step 0:

4.7.2 Keyboard/Mouse Connector

The KINO-GM45A is shipped with a keyboard/mouse Y-cable connector. The

keyboard/mouse Y-cable connector connects to a keyboard/mouse connector on the

KINO-GM45A and branches into two cables that are each connected to a PS/2 connector,

one for a mouse and one for a keyboard. To connect the keyboard/mouse Y-cable

connector please follow the steps below.

Step 1:

Locate the connector. The location of the keyboard/mouse Y-cable connector

is shown in Chapter 3.