IEI Integration PCIE-Q350 v1.30 - Manual (Page 52)

PCIE-Q350 PICMG 1.3 CPU Card
Page 32
The ITE IT8718F is an LPC interface-based Super I/O device that comes with an
integrated Environment Controller. Some of the features of the iTE IT8718F chipset are
listed below:
PC98/99/2001, ACPI and LANDesk Compliant
Enhanced Hardware Monitor
Fan Speed Controller
Multi curve for one fan control
Multi sensor for one fan control
Single +5V Power Supply
Two 16C550 UARTs for serial port control
Keyboard Controller
48 General Purpose I/O Pins
Watchdog Timer
Serial IRQ Support
SmartGuardian Controller
ITE automatic power-failure resume and power button debounce
Some of the Super I/O features are described in more detail below:
2.8.3.1 Super I/O LPC Interface
The LPC interface on the Super I/O complies with the Low Pin Count Specification Rev.
1.0. The LPC interface supports both LDRQ# and SERIRQ protocols as well as PCI PME#
interfaces.
2.8.3.2 Super I/O 16C550 UARTs
The onboard Super I/O has two integrated 16C550 UARTs that can support the following:
Two standard serial ports (COM1 and COM2)
IrDa 1.0 and ASKIR protocols
2.8.3.3 Super I/O Enhanced Hardware Monitor
The Super I/O Enhanced Hardware Monitor monitors three thermal inputs, VBAT
internally, and eight voltage monitor inputs. These hardware parameters are reported in
the BIOS and can be read from the BIOS Hardware Health Configuration menu.