B.1 dio interface introduction, B.2 dio connector pinouts, Nterface – IEI Integration PCIE-Q350 v1.30 User Manual
Page 187: Ntroduction, Onnector, Inouts
PCIE-Q350 PICMG 1.3 CPU Card
Page 167
B.1 DIO Interface Introduction
The DIO connector on the PCIE-Q350 is interfaced to GIO ports on the iTE Super I/O
chipset. The DIO has both 8-bit digital inputs and 8-bit digital outputs. The digital inputs
and digital outputs are generally control signals that control the on/off circuit of external
devices or TTL devices. Data can be read or written to the selected address to enable the
DIO functions.
NOTE:
For further information, please refer to the datasheet for the iTE Super
I/O chipset.
B.2 DIO Connector Pinouts
The following table describes how the DIO connector pins are connected to the Super I/O
GPIO port 1.
Pin
Description
Super I/O Pin
Super I/O Pin Description
1
Input 0
19 (GP30)
General purpose I/O port 3 bit 0
2
Output 0
27 (GP20)
General purpose I/O port 2 bit 0
3
Input 1
18 (GP31)
General purpose I/O port 3 bit 1
4
Output 1
26 (GP21)
General purpose I/O port 2 bit 1
5
Input 2
17 (GP32)
General purpose I/O port 3 bit 2
6
Output 2
25 (GP22)
General purpose I/O port 2 bit 2
7
Input 3
16 (GP33)
General purpose I/O port 3 bit 3
8
Output 3
24 (GP23)
General purpose I/O port 2 bit 3
9
Input 4
14 (GP34)
General purpose I/O port 3 bit 4
10
Output 4
23 (GP24)
General purpose I/O port 2 bit 4
11
Input 5
13 (GP35)
General purpose I/O port 3 bit 5
12
Output 5
22 (GP25)
General purpose I/O port 2 bit 5
13
Input 6
12 (GP36)
General purpose I/O port 3 bit 6
14
Output 6
21 (GP26)
General purpose I/O port 2 bit 6
15
Input 7
11 (GP37)
General purpose I/O port 3 bit 7