3 vga monitor connection, Figure 5-18: usb device connection – IEI Integration PCIE-Q350 v1.30 User Manual

Page 110

PCIE-Q350 PICMG 1.3 CPU Card

Page 90

Figure 5-18: USB Device Connection

Step 3:

Insert the device connector. Once aligned, gently insert the USB device

connector into the onboard connector.

Step 0:

5.9.3 VGA Monitor Connection

The PCIE-Q350 has a single female DB-15 connector on the external peripheral interface

panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor

to the PCIE-Q350, please follow the instructions below.

Step 1:

Locate the female DB-15 connector. The location of the female DB-15

connector is shown in Chapter 3.

Step 2:

Align the VGA connector. Align the male DB-15 connector on the VGA screen

cable with the female DB-15 connector on the external peripheral interface.

Step 3:

Insert the VGA connector

Once the connectors are properly aligned with the

insert the male connector from the VGA screen into the female connector on the