IEI Integration PCIE-Q350 v1.30 - Manual (Page 119)

PCIE-Q350 PICMG 1.3 CPU Card
Page 99
Configure SATA#n as [IDE]
Use the Configure SATA#n as BIOS option to specify whether the drive connected to the
nth SATA port is a standard IDE drive, a standard SATA drive (AHCI mode) or a SATA
drive in a RAID configuration mode.
IDE D EFAULT The drive connected to the nth SATA port is configured as an IDE
drive
RAID The SATA drive connected to the nth SATA drive port is specified
as a SATA drive that is part of a RAID array
AHCI The SATA drive connected to the nth SATA drive port is specified
as a normal SATA drive.
IDE Master and IDE Slave
When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the
status of the auto detected IDE devices. The following IDE devices are detected and are
shown in the IDE Configuration menu:
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Third IDE Master
Fourth IDE Master
The IDE Configuration menu (BIOS Menu 4) allows changes to the configurations for the
IDE devices installed in the system. If an IDE device is detected, and one of the above
listed four BIOS configuration options are selected, the IDE configuration options shown in
Section 6.3.2.1 appear.
6.3.2.1 IDE Master, IDE Slave
Use the IDE Master and IDE Slave configuration menu to view both primary and
secondary IDE device details and configure the IDE devices connected to the system.