2 usb device connection (single connector), Figure 5-17: lan connection – IEI Integration PCIE-Q350 v1.30 User Manual

Page 109

PCIE-Q350 PICMG 1.3 CPU Card

Page 89

Figure 5-17: LAN Connection

Step 3:

Insert the LAN cable to the RJ-45 connector. Once aligned, gently insert the

LAN cable RJ-45 connector into the onboard RJ-45 connector.

Step 0:

5.9.2 USB Device Connection (Single Connector)

There are two external USB 2.0 connectors. Both connectors are perpendicular to the

PCIE-Q350. To connect a USB 2.0 or USB 1.1 device, please follow the instructions

below.

Step 1:

Located the USB connectors. The locations of the USB connectors are shown

in Chapter 4.

Step 2:

Align the connectors. Align the USB device connector with one of the

connectors on the PCIE-Q350. See Figure 5-18.