Teledyne LeCroy IBTrainer - IBTrainer Users Manual - Manual (Page 94)

Using the InfiniBand Compliance Test Suite Test Description
94
CATC IBTrainer InfiniBand Exerciser, August 2002
Correct SMP Packet - Expect Response
CorrectSMPPacket
SLID Check
TD_10.6.6.1.1
Item Value
Name CorrectSMPPacket
Description A correct SMP packet is sent to the DUT.
Topology Simple
Initial link state Active
Assertions v1c07-036#01 v1c07-036#02
Prerequisites none
Test procedure A SubnDIRECTGet(PortInfo) is sent to the DUT.
A response is expected.
Item Value
Name TD_10.6.6.1.1
Description SLID Check
Topology Simple
Initial link state Active
Assertions v1c070-046#01
Prerequisites SanityCheck
Test procedure 1 In the PortInfo attribute of the DUT, the LMC value
is set to zero.
2 The LID in the PortInfo attribute of the DUT is set
to the value 2
N
and N is increased from 0 to 15.
3 If the LID value in the PortInfo of the response
packet is not the same as in the request packet,
the test fails.