Teledyne LeCroy IBTrainer - IBTrainer Users Manual - Manual (Page 44)

Testing with the User Interface Running the Test
44
CATC IBTrainer InfiniBand Exerciser, August 2002
N O T E The Receive Lane Skew list displays the lane skew of the received
InfiniBand traffic.
Running the Test
After you have set up the packet(s) of interest, you can send them to the
DUT.
If you have set up a single packet, you just need to right-click it and
select Transmit from the context menu.
If you have placed packets in the transmit memory, click the Run button
on the toolbar to send them to the DUT.
Using an external trigger In addition, you can specify in the properties of a given packet stored in
the transmit memory that the IBTrainer waits for an external trigger
signal before sending it and the following packets. Refer to “How to
Trigger the Transmission from an External Signal” on page 45 for
more information.