Teledyne LeCroy IBTrainer - IBTrainer Users Manual - Manual (Page 68)

Using the InfiniBand Compliance Test Suite Testing with the Compliance Tester User Interface
68
CATC IBTrainer InfiniBand Exerciser, August 2002
Testing with the Compliance
Tester User Interface
Starting the Compliance Tester
software
You can start the Compliance software from either the IBTrainer
software or directly from Windows:
• From the IBTrainer software
Click Tools>Compliance.
• From Windows
Press Start>Programs>CATC>IBTrainer(Release)>Compliance GUI.
The shortcut changes with the release installed. For example, if your
release is 2.0.1.0, then the name of the shortcut is IBTrainer
2.0.1.0>Compliance GUI .
Testing principles Testing with the Compliance Tester software means:
1. Add/Update tests. All executable tests are listed in the main area.
See “ How to Add or Update Tests” on page 69 for details.
2. Select the tests that should be executed.
See “ How to Select Tests” on page 70 for details.
3. Run the selected tests.
See “ How to Run Tests” on page 71 for details.
4. View the test report generated during the test.
The report is displayed in the CATC IBTrainer Compliance Test
Suite – Report window, but you can also create a report file. See
“ How to Set Up and View the Report” on page 72 for details.