Teledyne LeCroy IBTrainer - IBTrainer Users Manual - Manual (Page 76)

Using the InfiniBand Compliance Test Suite Test Description
76
CATC IBTrainer InfiniBand Exerciser, August 2002
TD_10.3.1.2.2
Item Value
Name TD_10.3.1.2.2
Description The test is used to ensure that the DUT does not re-
spond to a packet with a DLID invalid for the DUT.
Topology Simple
Initial link state Active
Assertions v1c07-010#02
DUT Channel Adapter, Switch; Router
Prerequisites SanityCheck
Test procedure 1 The tester sets the LMC of the DUT to 0.
2 The tester then sets the LID of the DUT and
checks if the DUT responds to that DLID.
3 Finally it sends out a packet with a DLID that is
invalid for the DUT (LID of DUT +1) expecting no
response.