Teledyne LeCroy IBTrainer - IBTrainer Users Manual - Manual (Page 42)

Testing with the User Interface Setting Up the Test
42
CATC IBTrainer InfiniBand Exerciser, August 2002
• Similarly, you can specify the properties of a packet in the transit
memory that should be sent upon an external trigger signal. Refer to
“How to Trigger the Transmission from an External Signal” on
page 45 for more information.
How to Insert Packets in the Transmit Memory
To insert a new packet in the transmit memory:
1 Create a new packet.
– or –
Select a pre-defined packet.
2 Drag and drop the selected packet to the Transmit Memory list.
3 You can set up the properties of the packets stored in the transmit
memory before sending them. Refer to “Configuring Outgoing
Packets to Be Transmitted” on page 36 for more information.
How to Send a Single Packet Multiple Times
The transmit memory offers a feature to repeatedly send specific
packets.
You can set the number of times the packet is sent by using a counter.
Three counters are available in the software and must be set in the
generator’s settings.
To set up a packet so that the IBTrainer sends it multiple times:
1 Select the counter that the packet should use.
– Double-click the packet of interest in the Transmit Memory list.
The dialog box containing the properties of the packet of interest
opens.
– Click Show Advanced attributes.