Teledyne LeCroy IBTrainer - IBTrainer Users Manual - Manual (Page 89)

Test Description Using the InfiniBand Compliance Test Suite
CATC IBTrainer InfiniBand Exerciser, August 2002
89
State Transitions
StateTransitions
Item Value
Name
StateTransitions
Description Valid transitions of the link state machine of the DUT
are tested.
Topology Simple
Initial link state Active
Assertions v1c07-001#05 v1c07-003#01 v1c07-001#11 v1c07-001#18
v1c07-001#23 v1c07-002#03 v1c07-002#04 v1c07-001#27
Prerequisites SanityCheck
Test procedure 1 The Link Training State machine of the tester is set to
'Sleep' and then to 'Poll'. After 300 ms, the link state
of the DUT is expected to be 'Initialized'.
2 After another 1000 ms, the DUT is expected to be still
in 'Initialized'.
3 The DUT is requested to switch to link state 'Arm'
and expected to transition into this state.
4 The generator is set into link state 'Arm' and the DUT
is requested to switch to link state 'Active' and
expected to transition into this state.
5 The DUT is requested to switch back to link state
'Arm' and expected to transition into this state.
6 The DUT is set back to link state 'Active'. The tester
is then set into link state ‘Down’. Because the link is
up, the link state of the tester switches to 'Initialize'.
The DUT is expected to switch to state ‘Initialize’ as
well.