Teledyne LeCroy IBTrainer - IBTrainer Users Manual - Manual (Page 75)

Test Description Using the InfiniBand Compliance Test Suite
CATC IBTrainer InfiniBand Exerciser, August 2002
75
Packet with Bad DLID
TD_10.2.4.1.5
Item Value
Name TD_10.2.4.1.5
Description The test is used to ensure that the DUT does not re-
spond to a packet with a DLID invalid for the DUT.
Topology Simple
Initial link state Active
Assertions v1c07-007#01.08
DUT Channel Adapter
Prerequisites SanityCheck
Test procedure 1 The tester sets the LMC of the DUT to 0.
2 The tester then sets the LID of the DUT and
checks if the DUT responds to that DLID.
3 Finally the tester sends out a packet with a DLID
that is invalid for the DUT (LID of DUT +1)
expecting no response.