Teledyne LeCroy IBTrainer - IBTrainer Users Manual - Manual (Page 55)

Setting Invalid Generator Properties Testing with the User Interface
CATC IBTrainer InfiniBand Exerciser, August 2002
55
Setting Invalid Generator
Properties
Why set invalid generator properties You can set invalid properties for the IBTrainer. Each DUT connected to
the generator asking for the generator’s properties becomes a packet
with invalid generator’s properties. You can then verify that the DUT
behaves as expected.
Properties that can be set Here are the generator’s properties that you can set:
• NodeInfo
(accessible via Generator>NodeInfo)
These properties are described in detail in the Properties and
Programmatic Settings section of the API Reference.
• NodeDescription
(accessible via Generator>NodeDescription)
These properties are described in detail in the Properties and
Programmatic Settings section of the API Reference.
• PortInfo
(accessible via Generator>PortInfo)
These properties are described in detail in the Properties and
Programmatic Settings section of the API Reference.