Teledyne LeCroy SierraNet M408 User Manual Ver.1.50 - Manual (Page 78)

Teledyne LeCroy Trigger and Filter Settings in Easy Mode
76 SierraNet M408 User Manual
 Splitter ‐ Clicking Splitter displays the Splitter Settings dialog with the Serdes tab
selected. (see
Figure 2.49 on page 77 ). Enter the desired values for each of the
parameters. Select the SFP tab (see Figure 2.50 on page 78 ) and enter the
desired values for each of the parameters. Select the Splitter tab (see Figure 2.51
on page 79 ) and enter the desired values for each of the parameters.
 Restore Factory Settings ‐ Restores the factory settings.
 Apply Selected Settings to All ‐ Applies the currently selected settings.
Figure 2.48: Advanced Probe Setting Dialog