Teledyne LeCroy SierraNet M408 User Manual Ver.1.50 - Manual (Page 226)

Teledyne LeCroy InFusion Scenarios
224 SierraNet M408 Protocol Analyzer User Manual
4.5.14 Copy and Paste Scenarios
You can copy and paste scenarios from one project to another project. Perform the
following steps to do so:
1. Select the scenario you want to copy in either the scenario name tab and select
Copy or in the Library pane, right‐click and select Copy Scenario (see Figure 4.12 on
page 224 .
Figure 4.12: Copy Scenario
2. Place the cursor in the area below in the Library pane, in the
project you want to paste in, right‐ click and select Paste Scenario.
Figure 4.13: Paste Scenario