Teledyne LeCroy SierraNet M408 User Manual Ver.1.50 - Manual (Page 128)

Teledyne LeCroy Trigger and Filter Settings in Easy Mode
126 SierraNet M408 User Manual
Link Control Frame
Double‐click Link Control Frame in the Pattern window to open the Add Link Control
Frame Pattern dialog.
Figure 2.86: Link Control Frame Pattern Dialog
Enter the values for the Frame Header, CS_CTL, F_CTL and the count of the expected
number of occurrences. Check the Check All box to select ports P1 through P4 or
individually select ports.
The following additional FC patterns are available:
FCP Patterns
Frame Information Unit
 FCP Frame Information Unit (Any)
 FCP Frame Information Unit (Data)
 FCP Frame Information Unit (Confirm)
 FCP Frame Information Unit (XFER READY)
 FCP Frame Information Unit (Command)
 FCP Frame Information Unit (Response)
SCSI
 Any SCSI Command
 6‐Byte Any SCSI Cmd
 10‐Byte Any SCSI Cmd
 12‐Byte Any SCSI Cmd
 16‐Byte Any SCSI Cmd
 Long LBA 16‐Byte Any SCSI Cmd
 Variable Length Any SCSI Cmd
 Variable Length for Long LBA 32‐Byte Any SCSI Cmd