Teledyne LeCroy SierraNet M408 User Manual Ver.1.50 - Manual (Page 59)

SierraNet M408 User Manual 57
Analyzer Settings Teledyne LeCroy
In the FC 16G Setting Tab y ou can select the following:
 Speed ‐ select 1.0625, 2.125, 4.25. 8.5, 16.0 and Autospeed from the drop‐down
list. Autospeed is the default.
 Disable Descrambling ‐ select ports.
 Training Signal Pack Mode ‐ Unpacked and Packed.
Figure 2.26: FC 16G Setting Tab - Recording Settings Dialog