Teledyne LeCroy SierraNet M408 User Manual Ver.1.50 - Manual (Page 117)

SierraNet M408 User Manual 115
Trigger and Filter Settings in Easy Mode Teledyne LeCroy
Note: For all VN Tag patterns enter a value for VN Tag.
2.6.17 LLC
LLC-IEEE802.ID Frame
Double‐click LLC‐IEEE802.ID Frame to open the dialog.
Figure 2.75: LLC-IEEE802.ID Dialog
Enter the values for the Ethernet, LLC Header, Spanning Tree Header, GARP Header and
select an option from the DSAP and SSAP pull ‐down menus. Enter the count of the
expected number of occurrences. Check the Check All box to select ports P1 through P8
or individually select ports.
Other LLC-IEEE802.ID patterns available are:
 Bridge Protocol Data Unit (BPDU)
 Configuration BPDUs
 Multiple Spanning Tree BPDUs (MSTP)
 Rapid Spanning Tree BPDUs (RSTP)
 Topology Change Notification BPDU (TCNP)
 Variable Length Any SCSI Cmd
 Variable Length For Long LBA 32‐Byte Any SCSI Cmd
 GARP Multicast Registration Protocol (GMRP)
 GARP VLAN Registration Protocol (GVRP)
 Generic Attribute Registration Protocol (GARP)