Teledyne LeCroy SierraNet M408 User Manual Ver.1.50 - Manual (Page 134)

Teledyne LeCroy Trigger and Filter Settings in Easy Mode
132 SierraNet M408 User Manual
 FCAE‐VI(WRITE_RQST)
 FCAE‐VI(READ_RQST)
 FCAE‐VI(READ_RESP)
 FCAE‐VI(CONNECT_RQST)
 FCAE‐VI(DISCONNECT_RQST)
 FCAE‐VI(CONNECT_RESP1)
 FCAE‐VI(CONNECT_RESP2)
 FCAE‐VI(CONNECT_RESP3)
 FCAE‐VI(DISCONNECT_RESP)
 FCAE‐VI(SEND_RESP)
 FCAE‐VI(WRITE_RESP)
FCAV Patterns
 FCAV(Simple)
 FCAV(Extended)
VSAN Patterns
FCP
 FCP Frame Information Unit(Any)
 FCP Frame Information Unit(Data)
 FCP Frame Information Unit(Confirm)
 FCP Frame Information Unit(XFER READY)
 FCP Frame Information Unit(Command)
 FCP Frame Information Unit(Response)
SCSI
 Any SCSI Command
 6‐Byte Any SCSI Cmd
 10‐Byte Any SCSI Cmd
 12‐Byte Any SCSI Cmd
 16‐Byte Any SCSI Cmd
 Long LBA 16‐Byte Any SCSI Cmd
 Variable Length Any SCSI Cmd
 SPC4
 SBC3
 MMC6
 SMC2
 SSC2
 OSD2
 ADC3
FCP Task Management
 SPC4
ARB
 ARB Loop Initialization
ELS Patterns
 ELS Request