Teledyne LeCroy LogicStudio - Manual (Page 7)

Getting Started Manual
B
922294 Rev A 3
Operating Environment
The accessory is intended for indoor use and should be operated in a clean,
dry environment. Before using this product, ensure that its operating
environment is maintained within these parameters:
Temperature: Operating, 0° to 50° C; Non-operating, -40° to 71° C
Humidity: 5% to 85% relative humidity (%RH) up to +30° C
5% to 65% RH above +30° C to 40° C
5% to 45% RH above 40° C
Altitude: Up to 10,000 ft (3,048 m) at or below 25 °C.
Software and Driver Installation
The most recent LogicStudio installer is available as a .zip file from the
Teledyne LeCroy website at teledynelecroy.com.

Choose to Save the .zip file to a location on your local computer.

When the .zip file is completely downloaded to your machine, double-
click the file to open its contents. Two files and two folders should be
shown.

Double-click the file named Setup.exe to launch the installer.
The installer guides you through proper setup of both the LogicStudio
software and necessary drivers for your computer as explained in the
following topics.