Teledyne LeCroy LogicStudio - Manual (Page 6)

LogicStudio
A
2 922294 Rev A
Safety Instructions
This section contains instructions that must be observed to keep this
oscilloscope accessory operating in a correct and safe condition. You are
required to follow generally accepted safety procedures in addition to the
precautions specified in this section. The overall safety of any system
incorporating this accessory is the responsibility of the assembler of the
system.
Symbols
These symbols may appear on the accessory body or in this manual to alert
you to important safety considerations.
CAUTION. Potential for damage to probe or instrument it is
connected to. Attend to the accompanying information to protect
against personal injury or damage. Do not proceed until conditions
are fully understood and met.
ELECTROSTATIC DISCHARGE (ESD) HAZARD. Susceptible to
damage if anti-static measures are not taken.
DOUBLE INSULATION
Precautions
Connect and disconnect properly.
Use only within operational environment listed. Do not use in wet or
explosive atmospheres.
Use indoors only.
Keep product surfaces clean and dry. Do not submerge the accessory.
Clean with a water- or alcohol-moistened cloth. Do not use harsh or
abrasive cleansers.
Do not operate with suspected failures. Do not use if any part is damaged.
Cease operation immediately and sequester the probe from inadvertent
use.