Teledyne LeCroy LogicStudio - Manual (Page 14)

LogicStudio
A
10 922294 Rev A
Scale and Grid
A timescale is displayed along the top edge of the waveform display area at
all times. The scale steps and labels dynamically adjust based on the
current timeframe shown. Labeled tick marks have dashed grid lines
extending the full height of the display providing waveform reference.
Interacting with Cursors
Cursors are easily applied to the waveform display area (see The Cursors
Tool topic for more information).
Tools
Controls for LogicStudio’s built in Tools are located in the space above the
Waveform Display Area. The built in tools include controls for Cursors,
RearView™, and Magnifier, respectively.
Toggle the Cursors and Magnifier tools (RearView™ is always on except in
MSO mode) on or off by clicking the main portion of the control (containing
the icon). Click the right side of the control to access detailed controls
related to each tool.
The Cursors Tool
This topic demonstrates the use of the Cursors tool.
When the Cursor tool is enabled, you are currently armed with the selected
cursor pair on the waveform display. When expanded, the tool’s detailed
control provides storage for up to 4 cursor pairs. When cursors are placed
on the display, they are highlighted when the pair is selected from the