Teledyne LeCroy LogicStudio - Manual (Page 28)

LogicStudio
A
24 922294 Rev A
Clicking or using the up/down arrow keys to select a row on the table
centers the waveform display timeframe on the selected sample and
highlights the transition with a vertical bar glowing in the color of the given
signal. Use this feature to quickly jump the display to samples of interest on
the Data Table. This works in both the Data Table window and in the
Export window’s preview table.
NOTE : You can leave this pop-up open for one or more signals while you
capture new acquisitions. The table data updates to show current
information as acquisitions are completed.
The Dashboard
The Dashboard is comprised of all control and information GUI elements
seen when you first start the application. You can perform many powerful
operations and quickly access most of the functions from the Dashboard.
Device Connections
The Device Connections button is shown on the upper-left corner of the
screen, just below the menu bars.
This button represents your digital pod and oscilloscope device
connections. Clicking the button opens the Device Finder tool to allow you
to choose a device to set up from the available connected devices. Refer to
the
Device Finder section later in this document for more details on this
tool.
This button has a blue glow when you are connected to one or more
devices and the icon will update to reflect what type of devices you are
connected to. The red X next to the button will disconnect all devices.
A red X over the button indicates the device is not currently present or has
been explicitly disconnected by the user.