Teledyne LeCroy LogicStudio - Manual (Page 5)

Getting Started Manual
B
922294 Rev A 1
Welcome
Thank you for purchasing a Teledyne LeCroy LogicStudio.
This document provides an overview of the LogicStudio application
features and describes how to perform various operations. Software
interface updates may result in a slight difference between screenshots
seen in this manual (running on Windows® 7) and the interfaces you’ll find
in the software and operating system versions you’re running. Regardless,
the differences do not prevent you from easily following the explanations.
System Requirements

Operating System: Windows® XP, Windows® Vista, Windows® 7
(32 or 64 Bit Versions).

1 GB RAM minimum, 2 GB recommended.
Package Contents

LogicStudio 16 USB Logic Analyzer

Digital Leadset – 16 channels, 4 ground

20 Grippers

1 USB Cable

1 BNC cable

Software Download Instructions
We truly hope you enjoy using Teledyne LeCroy's fine products.
Sincerely,
David C. Graef
Teledyne LeCroy Corporation
Vice President and Chief Technology Officer