IAI America PDR-101-MW - Manual (Page 15)

5
1.5 Options
(1) PC Software (Model PDR-101-MW)
Content: Floppy disks, PC link cable 1.5 m (Unit model CB-ST-SIO015)
Used to set P-Driver parameters, monitor jogging operation during debugging, check various signals,
and so on.
Wire Color Signal No. No. Signal Color Wire
1 1
Orange with black dots RD 2 3 TXD Orange with black dots
Orange with red dots SD 3 2 RXD Orange with red dots
ER 4 4 DTR
Yellow with black dots SG 5 5 SG Yellow with black dots
DR 6 6 DSR
RS 7 7 RTS
CS 8 8 CTS
AWG24 x
7 cores
9 9
AWG24 x
7 cores
(2) External I/O Cable (Model CB-PD-PIOS020)
Content: Plug, shell and 2-m shielded cable
Use this cable for connection between I/O signals and the host device.
No connector for the host device side is provided.
Perform wiring according to the host device to be used.
Wire Color Signal No.
Black COM-A 1 Black
White/black COM-A 2 White/black
Red SRDY 3 Red
White/red RUN 4 White/red
Green INP 5 Green
White/green ORGR 6 White/green
Yellow TLR 7 Yellow
White/yellow ALM 8 White/yellow
Brown SON 9 Brown
White/brown RES 10 White/brown
Blue ORGC 11 Blue
White/blue TL 12 White/blue
Gray CSTP 13 Gray
White/gray COM-B 14 White/gray
Orange NP 15 Orange
White/orange /NP 16 White/orange
Purple PP 17 Purple
White/purple /PP 18 White/purple
Light green AFB 19 Light green
White/light green /AFB 20 White/light green
Pink BFB 21 Pink
White/pink /BFB 22 White/pink
Sky blue ZFB 23 Sky blue
White/sky blue /ZFB 24 White/sky blue
White GND 25 White
0.2 sq.,
soldered
Black/white GND 26 Black/white
Shield is connected to a cable clamp Shield
1.5 m
Controller side
XM2D-0901 PC side
XM2D-0901
2 m
10126-3000VE
2464-1061-2A-SB-5PX24AWG
PC link cable
Taiyo Electric Wire & Cable (7-core twisted paired
cable with shield; UL/cUL compliant)
D-sub 9-pin socket:
XM2D-0901 (Omron)
Hood:
XM2S-0913 (Omron) D-sub 9-pin socket:
XM2D-0901 (Omron)
Hood:
XM2S-0913 (Omron)
Sunlight SX (N), 13P x 0.2 sq. (Taiyo Electric Wire & Cable)
Plug: 10126-3000VB (Sumitomo 3M)
Shell: 0326-52A0-008 (Sumitomo 3M)
No connector at end
Shield
Host device side