beautypg.com

IAI America CT4 User Manual

Page 63

background image

4. Maintenance Inspection

57

(3) Attaching the New Motor

1) Adjust the coupling on the new motor so the screw on it faces below.









2) Locate the table at a point of 2mm from the mechanical end.

Hold the slider so it would not drop down.











3) Slide in the motor to the main body and temporarily tighten the screws to affixing the motor.

Tighten the coupling tightening screw (at the circled places).













Tool to use: Hex Wrench 3mm-sized

Screw

Coupling

Tool to use: Hex Wrench 2mm-sized
Tightening Torque : 45.8N•cm

See also other documents in the category IAI America Hardware: