IAI America CT4 - Manual (Page 22)

2. Installation
16
2. Installation
2.1 Transportation
2.1.1 Handling of the Robot
[1] Handling of the Robot
Pay attention to the following when carrying the High-Speed Orthogonal Robot CT4. (described as
CT4 from now on)
(1) When delivered with the axes attached at the IAI factory
It will be delivered in a package with an outer case fixed to a wooden base. The sliders are fixed so
they will not accidently move while in transportation.
x Do not damage or drop. The package is not applied with any special treatment that
enables it to resist an impact caused by a drop or crash.
x Consider an appropriate method for transportation.
x When suspending the package using ropes, pass the ropes from underneath the
reinforcement frames at the bottom of the base. When lifting with a forklift, also place the
forks underneath the base.
x Do not apply an impact on the package or let it bounce when putting it down.
x Do not step or sit on the package.
x Do not put any load that may cause a deformation or breakage of the package.