IAI America CT4 - Manual (Page 30)

3. Connecting to the Controller
24
3. Connecting to the Controller
For the controller, those other than the controller dedicated for CT4 cannot be used.
Using other controllers may cause a problem such as burning the product, ignition or generating
heat.
Use the dedicated cables enclosed in the package when connecting of the CT4 and the controller.
[XSEL-PCT/QCT Connecting to the Controller]
x Motor Cable CB-CT4-MAƑƑƑ
x Encoder Cable CB-CT4-PAƑƑƑ
ƑƑƑ shows the cable length.
The max. length should be 30m.
Example) 080 = 8m
Dedicated Controller
XSEL-PCT, QCT
CT4 Actuator
r = 51mm or more (Movable Use)
r = 34mm or more (Fixed Use)
Dedicated Connection Cables
(Connect the CT4 with the dedicated controller)
Regenerative
Resistor Unit
2 Units