IAI America RCAW - Manual (Page 66)

4. Maintenance
60
4.4 Applying Grease to the Sliding Surface of the Rod
(1) Applicablegrease
KyodoYushi MultempLRL3
Warning: Never use any fluorine-based grease.
It will cause a chemical reaction when mixed with a lithium-based grease and may cause
damage to the actuator.
(2) How to apply grease
Apply grease over the entire surface of the rod.
Caution: In case the grease got into your eye, immediately go to see the doctor to get an
appropriate care.
After finishing the grease supply work, wash your hands carefully with water and soap
to rinse the grease off.