IAI America RCAW - Manual (Page 46)

2. Installation
40
2. Installation
2.1 Transportation
[1] Handling of Robot
Unless otherwise specified, the actuators are packaged individually.
(1) Handling the Packed Unit
y Do not damage or drop. The package is not applied with any special treatment that enables it to resist
an impact caused by a drop or crash.
y Transport a heavy package with at least more than two operators. Consider an appropriate method for
transportation.
y Keep the unit in horizontal orientation when placing it on the ground or transporting. Follow the
instruction if there is any for the packaging condition.
y Do not step or sit on the package.
y Do not put any load that may cause a deformation or breakage of the package.
(2) Handling the Actuator After Unpacking
y Do not attempt to carry the actuator with holding a cable or move it by pulling a cable.
y Hold either the base part or the bracket part when transporting the actuator main body.
y Do not hit or drop the actuator during transportation.
y Do not carry an actuator by motor unit and a cable or attempt to move it by pulling the cable.