IAI America RCAW - Manual (Page 42)

1. Specifications Check
36
1.3.14 Front Trunnion (Model No. : TRF)
This bracket is used to make the cylinder follow up when the movement of an object attached on the tip
of the rod is different from the direction of rod movement. Attach on the rod.
φ32 φ42 φ35
Model code of single product
RCA-TRF-RA3
14(Width
across Flats)
32(Width across Flats)
Nut A
For RCA-RA3□
9.5
3 3
SE
ME
18
20
49
10
st
90
64.3
40
40
70
8 60
5
10
55
M8×1.25 (Effective screw range = 16)
M35×1.5
(Effective screw range = 17.5)
φ16 (ROD O/D)
2-φ6.8
40(Width across Flats)
Home
Nut C
Bracket A
Ring
Bracket B
ME
φ20 (ROD O/D)
22
3
9
5
56
10
55
3
10
st
ME
ME SE
94
64
40
22
74
9.5
66.4 40
M10×1.25 (Effective screw range = 20)
M40×1.25
(Effective screw range = 19.5)
φ37
19(Width
across Flats)
36(Width across Flats)
47(Width across Flats) Home
Nut C
Bracket A
Ring
Bracket B
Model code of single product
RCA-TRF-RA4
For RCA-RA4□
Caution: Use the guide equipped type or attach the external guide so that any load is given to the rod
other than in the forward direction, when the trunnion is attached and the rod is moved.