Reese 37152 MULTI-FIT RECEIVER - Manual (Page 3)

SIDE BRACKET LOCATION 4.
SIDE BRACKET LOCATION 3.
BRACKET LOCATIONS
TOOLS REQUIRED
3/4"(19MM) SOCKET
SAFETY GLASSES
TORQUE WRENCH
1/2” KNURL NECK BOLT
1/2 LOCK WASHER
1/2 HEX NUT
1/2” KNURL NECK BOLT
1/2 LOCK WASHER
1/2 HEX NUT
1. Loosely install Side Brackets on vehicle per specific instructions.
Align holes in side plate with side bracket as shown.
2. Install the 1/2” Knurl neck bolts, 1/2 lock washers, and 1/2 hex nuts.
3. First - Tighten Knurl neck bolts to 90 FT-LB to seat bolt, then loosen and
retighten to 75 FT-LB
4. Second - Tighten Side Bracket fasteners to proper specifications.
(Refer to general instructions on Page 1. for specs. )
5. Center receiver tube on vehicle and tighten center section fasteners to 75 LB-FT.
1. Loosely install Side Brackets on vehicle per specific instructions.
Align holes in side plate with side bracket as shown.
2. Install the 1/2” Knurl neck bolts, 1/2 lock washers, and 1/2 hex nuts as shown.
3. First - Tighten Knurl neck bolts to 90 FT-LB to seat bolt, then loosen and
retighten to 75 FT-LB
4. Second - Tighten Side Bracket fasteners to proper specifications.
(Refer to general instructions on Page 1. for specs. )
5. Center receiver tube on vehicle and tighten center section fasteners to 75 LB-FT.
CENTER SECTION BOLTS
(Location varies per vehicle)
SIDE BRACKET
SIDE PLATE
SIDE BRACKET
SIDE PLATE
CENTER SECTION BOLTS
(Location varies per vehicle)
RECEIVER TUBE
RECEIVER TUBE