beautypg.com

Reese 37004 PREMIUM RECEIVER User Manual

Reese, Installation instructions, Gm full size van

background image

REESE

INSTALLATION INSTRUCTIONS

Product No.

37004

You can take it with you.

SMALL PARTS

PACKAGE 37216

ELKHART, IN., OAKVILLE, ONT.

GM FULL SIZE VAN

TOOLS REQUIRED

WARNING: DO NOT LUBRICATE THREADS, BOLT FAILURE MAY
OCCUR DUE TO OVER TIGHTENING.
WARNING: DO NOT DRILL OR WELD TO THIS HITCH.

IMPORTANT NOTES

USE ONLY REESE SUPPLIED OR APPROVED BOLTS, LOCKNUTS,
AND WASHERS TO INSTALL THIS HITCH

3/4" SOCKET
TORQUE WRENCH

1/2" RIB NECK BOLT

1/2" CARRIAGE BOLT

BOLT PLATE

1/2" FLAT WASHER

1/2" LOCK WASHER

1/2" NUT

1/2" LOCK WASHER

1/2" NUT

(OVER)

1. Lift the side brackets up to the frame to find the holes in the frame that correspond with the holes in the brackets.

2. Install a bolt plate over one of the 1/2" carriage bolts and insert the bolt down through one of the holes in the frame.
Repeat this for all six mounting locations. See the diagram above.

3. Lift the side brackets up to the frame and place them over the bolts. Install a 1/2" flat washer, 1/2" lock washer and
1/2" nut on each bolt. See the diagram above.

4. Lift the center section of the hitch up between the side brackets. Install six 1/2" rib neck bolts as shown in the
diagram above. Install 1/2" lock washers and 1/2" nuts on these bolts.

5. Torque all 1/2" nuts to 75 ft.*lb.

For Installation Assistance or Technical Help, Call 1-800-758-0869

37004IN-1SEP97B PCN3662 © 1997 REESE PRODUCTS, INC.

Litho in USA