beautypg.com

Reese 45002 TITAN RECEIVER User Manual

Installation instructions, Ford pick-up, Product no

background image

INSTALLATION INSTRUCTIONS

Product No.

45002

You can take it with you.

SMALL PARTS

PACKAGE 45111

ELKHART, IN., OAKVILLE, ONT.

FORD PICK-UP

WARNING: DO NOT LUBRICATE THREADS, BOLT FAILURE MAY
OCCUR DUE TO OVER TIGHTENING.
WARNING: DO NOT DRILL OR WELD TO THIS HITCH.

IMPORTANT NOTES

USE ONLY REESE SUPPLIED OR APPROVED BOLTS, LOCKNUTS,
AND WASHERS TO INSTALL THIS HITCH

TOOLS REQUIRED

3/4" SOCKET
3/4" WRENCH
1/2" DRILL
TORQUE WRENCH

1/2" SERRATED WASHER

1/2" LOCK WASHER

1/2" NUT

1/2" CARRIAGE BOLT

LARGE BOLT PLATE

TWO HOLE PLATE

SMALL BOLT PLATE

NOTE: THIS PRODUCT IS NOT RECOMMENDED

FOR USE ON A 1/2 TON VEHICLE.

1. Place the hitch up to the frame with the large hole in the hitch flange over the rivet head near the end of the frame.

Clamp the hitch in place.

2. Using the holes in the brackets as a guide, drill eight 1/2" holes into the truck frame.

(OVER)

For Installation Assistance or Technical Help, Call 1-800-758-0869

45002IN-1DEC97K PCN3775 © 1997 REESE PRODUCTS, INC.

Litho in USA