E-Mon E-PS-E-RTU-N - Manual (Page 94)

Chapter 5 Configuring the PowerSmart+ PQM Configuring Meter Security
94 PowerSmart+ Power Quality Meter
Using Power Software
Ensure that the On-line button on the Power Software toolbar is checked,
select Administration from the Monitor menu, and then select Change
Password -> Password 1.
Figure 5-15: Password Setup Dialog Box
To change the password:
1. Type in a new 4-digit password
2. Repeat the password in the Confirm new password box
3. Check Enable password protection to enable password
checking
4. Click Send.